Options

Technical Specification TK04 Options

Lever press

Lever press with pressure limiter

Name Lever press with pressure limiter
Application ensures good contact between probes for plane surfaces (Standard HLQ, Mini HLQ) and samples by applying controlled pressure
Contact pressure 0 to 10 bar/1.7 kN, stepless
Dimensions approx. 290 x 150 mm, height 420/575 mm (lever down/up)
Weight 12.9 kg
Sample size height max. 13 cm, other dimensions practically unlimited
Supplied parts lever press, screws, data sheet (delivered w/o sample and probe)

Technical specifications are subject to change without prior notice.

Sample container

Sample container for liquids, pastes, powder and fragments

Name Sample container
Application testing liquids, pastes, powder or fragments with the Standard HLQ
Dimensions Ø 108 mm, height 81 mm (outer dimensions), inner diamater matching the Standard HLQ
Weight 1800 g
Supplied parts sample container, 2 handles for removing the probee

Technical specifications are subject to change without prior notice.

Guiding tubes

  Guiding tubes for Standard VLQ Guiding tubes for Field VLQ
Name Guiding tubes for Standard VLQ Guiding tubes for Field VLQ
Application fixed measuring position for safe insertion of needle probes (Standard VLQ) into hardening samples (re-usable) fixed measuring position for safe insertion of large needle probes (Field VLQ) in the field (re-usable)
Material stainless steel V2A stainless steel V2A
Outer diameter 2.5 mm 7 mm
Length ca. 75 mm ca. 320 mm
Supplied parts 10 guiding tubes 10 guiding tubes, insertion tool, case

Technical specifications are subject to change without prior notice.

Reference materials

  Reference material ST 1.6 for Standard VLQ Reference material ST 1.6 for Standard HLQ Combined Reference material ST 1.6 for Standard VLQ and HLQ Reference material ST 0.2 for Standard VLQ
Name ST 1.6 for Standard VLQ ST 1.6 for Standard HLQ ST 1.6 for Standard Probes ST 0.2 for Standard VLQ
Thermal conductivity * 1.6 W/mK 1.6 W/mK 1.6 W/mK 0.2 W/mK
Dimensions ** 55 x 55 x 90 mm 110 x 90 x 30 mm 110 x 90 x 55 mm Ø 60 mm, Höhe 90 mm
Drill hole Ø 2 mm keine Ø 2 mm Ø 2 mm
Physical properties download datasheet download datasheet download datasheet download datasheet
Supplied parts Reference material, TC certificate Reference material, TC certificate Reference material, TC certificate Reference material, TC certificate
Application Checking the operating condition of instrument and probes. The user is not required to perform any calibration or reference measurements!

* The specified thermal conductivities are approximate values. Each reference block is calibrated individually before delivery and is labeled with its exact thermal conductivity value.

** Dimensions may vary slightly.

Technical specifications are subject to change without prior notice.